| · Machine lengths; 2500 mm (98.4") |
| · 5 different boring bars available allowing boring up to 110 mm (4.33") |
| · Large selection of cutter tools as standard equipment |
| · Spindle speeds up to 750 r.p.m. |
| · Roughing and finishing feeds |
|
Increased engine performance may result in warped blocks, necessitating reboring of main bearings and camshaft bearings. Thrust bearing faces can be damaged due to bearing seizure. Reboring of main bearings, camshaft bearings, reboring of cylinder head camshaft bores and repairing of thrust bearing faces are all easily done on the AMC-SCHOU line boring machine, giving years of quality service - The Benefits of Precision. |
| TECHNICAL SPECIFICATIONS | L 2500 V | |
| Max.
block length | mm inch | 2540 100 |
| Max. distance from
built-in parallels to boring bar | mm inch | 850 33.5 |
| Spindle
speeds | rpm | 0-750 |
| Fast feed | mm/min inch/min | 6-1000 0.3-39.4 |
| Feed
jog adjustable | mm/min inch/min | 6-1000 0.3-39.4 |
| Feed jog high
speed | mm/min inch/min | 1000 39.4 |
| Max.
boring bar travel | mm inch | 680 26.8 |
| Motors | ||
| Drive
motor for spindle | kW hp | 1.5 2 |
| Drive
motor feed | kW hp | 0.37 0.5 |
| Dimensions |
||
| Height of machine | mm inch | 2200 86.6 |
| Total length of
machine | mm inch | 5100 200.8 |
| Total width of
machine | mm inch | 800 31.5 |
| Working space
required | mm inch | 7600
x 800 299.2 x 31.5 |
| Net. weight approx. | kg lbs | 2700 5940 |
| Shipping
weight approx. (wooden box) | kg lbs | 3140 6908 |
| Shipping volume | m³ ft³ | 12.82 452,7 |
| We are engaged in a continuous process of improving our machines. The details associated with any descriptions,
specifications and illustrations shown may thus vary without further notice. |
|
Standard Equipment: tropicalized installation, drive head motor, 6 spindle speeds, 2 spindle feeds, remote hand feed control device, fixed parallels, setting up blocks (2 sets), overhead steady rest, boring bar shaft extension, tool setting micrometer with dial gauge, magnetic micrometer V-rest, 2 centering devices with dial indicators, 20 pcs. boring, facing and chamfering tools, clamps, bolts & spanners, operating manual and spare parts
catalogue. |
|
Extra Equipment: boring bars, cutterheads, off-set bracket bushings, sag measuring device for bars, radial facing attachment, internal measuring gauges, tool grinder, cap grinder, cutter head holder and more.
|